R134A Refrigeration Gases

Product Details:

• Non-ozone depleting refrigerant.
• Efficient refrigerant in various air conditioning and medium temperature refrigerant applications.
• One of the components of fluoro refrigerant blends (407C,404A).

• ASHRAE safety classification A1-non-toxic and non-flammable
• GWP 1430
• Recommended lubricant POE or PAG (auto)

Applications:

• Air condition automotive air conditioning, stationary air conditioning (large size chillers, air conditioner).
• Medium temperature refrigeration commercial refrigeration, food processing and storage, industrial refrigeration, industrial refrigeration, transport refrigeration.
• High temperature heat Pumps.

Performance:

• Fluoro 134a provides good energy efficiency to the systems even at high condensing temperatures.

Lubrications:

• Polyolester (POE) or polyalkylene glycol (PAG - only for auto A/C) lubricants must be used with Fluoro 134a since it is not miscible with mineral oil or alkylbenzene lubricants. POE or PAG oil absorb moisture quickly when left exposed to the atmosphere. Handle them carefully and avoid prolonged exposure to air.

Charging:

• Charging with Fluoro 134a can be done either as a vapor or a liquid. End - users should check with their equipment manufacturer''s guidelines for specific charging instructions.

Deliveries:

• Fluoro R134a can be delivered in various packaging
  
• Bulk ISO container(20 tons) or ton-tank(825kg).
• Disposable cylinders 13.6 kg each (for exports only).
• 62 kg & 10 kg cylinders.
• Disposable can 450 & 340 gm.

Product Details:

NOTE : " We Deals In Bulk Quantity " .

Description:
Inhalation: Remove from exposure, lie down. Move to fresh air. Keep patient warm and at rest.Artificial respiration and/or oxygen may be necessary. Consult a physician.Skin contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes.Take off all contaminated clothing immediately. Consult a physician. Wash contaminated clothing before re-use. Treat for frostbite if necessary by gently warming affected area. Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Consult a physician if necessaryIngestion: Ingestion is not considered a potential route of exposure.General Advice: Never give anything by mouth to an unconscious person. When symptoms persist or in all cases of doubt seek medical adviceSelf-protection of the first aider: If the potential for exposure exists refer to Section 8 for specific personal protective equipment.Notes to physician: Because of possible disturbances of cardiac rhythm, catecholamine drugs, such as epinephrine, that may be used in situations of emergency life support should be used with special caution.

Fire Fighting Measures:

Suitable extinguishing media: Use extinguishing measures that are appropriate to local circumstances and the surrounding environment.Special hazards arising from the substance or mixture: Cylinders are equipped with pressure and temperature relief devices, but may still rupture under fire conditions. Decomposition may occur. Contact of welding or soldering torch flame with high concentrations of this substance can result in visible changes in the size and colour of the torch flame. This flame effect will only occur in concentrations of this substance well above the recommended exposure limit. Therefore stop all work and ventilate to disperse vapors from the work area before using any open flames. This substance is not flammable in air at temperatures up to 100 deg. C (212 deg. F) at atmospheric pressure. However, mixtures of this substance with high concentrations of air at elevated pressure and/or temperature can become combustible in the presence of an ignition source. This substance can also become combustible in an oxygen enriched environment (oxygen concentrations greater than that in air). Whether a mixture containing this substance and air, or this substance in an oxygen-enriched atmosphere become combustible depends on the inter-relationship: the temperature, the pressure, and the proportion of oxygen in the mixture. In general, this substance should not be allowed to exist with air above atmospheric pressure or at high temperatures; or in an oxygen-enriched environment. For example, this substance should NOT be mixed with air under pressure for leak testing or other purposes. Experimental data have also been reported which indicate combustibility of this substance in the presence of certain concentrations of chlorine.

Product Details:

• The Non-Ozone-Depleting Gas Is More Environmental Friendly Than R-12 Refrigerants
• High-Quality Formula To Help Keep Your Air Conditioning System Running Smoothly
• Meets Sae J2776 Purity Standard Lower Likelihood Of Sludge Or Tar Forming In The Cooling System
• Manufactured And Supplied According To Internationally-Recognized Standards

• If Your Air Conditioning Is Blowing Cool-But-Not-Cold Or Warm Air, It Could Be A Sign That The A/C Refrigerant Needs To Be Recharged Or Refilled.

• Always Work In Well-Ventilated Areas When Working With Ac Refrigerants And Never Release Refrigerants Into The Atmosphere.
• Use Either The Recommended, A Drop-In Replacement Or A Near Drop-In Replacement Refrigerant For Your Air Conditioning Unit. This Information Can Be Found In Your Vehicle Owner’S Manual.

Product Details:

NOTE :  " We Deals In Bulk Quantity " . 

Details:

• Non-ozone depleting refrigerant.
• Efficient refrigerant in various air conditioning and medium temperature refrigerant applications.
• One of the components of fluoro refrigerant blends (407C,404A).

Properties:

• ASHRAE safety classification: A1-non-toxic and non-flammable
• GWP: 1430
• Recommended lubricant: POE or PAG (auto)

Applications:

• Air condition: automotive air conditioning, stationary air conditioning (large size chillers, air conditioner).
• Medium temperature refrigeration: commercial refrigeration, food processing and storage, industrial refrigeration, industrial refrigeration, transport refrigeration.
• High temperature heat Pumps.

Performance:

• Fluoro 134a provides good energy efficiency to the systems even at high condensing temperatures.

Lubrications:

• Polyolester (POE) or polyalkylene glycol (PAG - only for auto A/C) lubricants must be used with Fluoro 134a since it is not miscible with mineral oil or alkylbenzene lubricants. POE or PAG oil absorb moisture quickly when left exposed to the atmosphere. Handle them carefully and avoid prolonged exposure to air.

Charging:

• Charging with Fluoro 134a can be done either as a vapor or a liquid. End - users should check with their equipment manufacturer's guidelines for specific charging instructions.

Deliveries:

• Fluoro R134a can be delivered in various packaging:
  
• Bulk ISO container(20 tons) or ton-tank(825kg).
• Disposable cylinders 13.6 kg each (for exports only).
• 62 kg & 10 kg cylinders.
• Disposable can 450 & 340 gm.