Refrigerant Gas

Product Details:

Refrigerant is a compound typically found in either a fluid or gaseous state. It readily absorbs heat from the environment and can provide refrigeration or air conditioning when combined with other components such as compressors and evaporators. 

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: IMMEDIATE
• Packaging Details: DEPEND ON THE PRODUCT

Product Details:

Refrigerant is a compound typically found in either a fluid or gaseous state. It readily absorbs heat from the environment and can provide refrigeration or air conditioning when combined with other components such as compressors and evaporators. 

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: IMMEDIATE
• Packaging Details: AS PER PRODUCT

Product Details:

NOTE :  " We Deals In Bulk Quantity " . 

This SDS adheres to the standards and regulatory requirements of the United States and may not meet the regulatory requirements in other countries.

Section 1. Product And Company Identification:

• Product name: DuPont™ ISCEON® MO29™ refrigerant
• Product Grade/Type: ASHRAE Refrigerant number designation: R-422D
• Tradename/Synonym: Isceon® MO29 R-422D MO29
• MSDS Number: 130000027389
• Product Use: Refrigerant
• Manufacturer: DuPont 1007 Market Street Wilmington, DE 19898
• Product Information: 1-800-441-7515 (outside the U.S. 1-302-774-1000)
• Medical Emergency: 1-800-441-3637 (outside the U.S. 1-302-774-1139)
• Transport Emergency: CHEMTREC: 1-800-424-9300 (outside the U.S. 1-703-527-3887).

Section 2. Hazards Identification:
Emergency Overview Misuse or intentional inhalation abuse may lead to death without warning. Vapours are heavier than air and can cause suffocation by reducing oxygen available for breathing. Rapid evaporation of the liquid may cause frostbite.

Potential Health Effects:

• Skin: Contact with liquid or refrigerated gas can cause cold burns and frostbite.
• Eyes: Contact with liquid or refrigerated gas can cause cold burns and frostbite.
• Inhalation: Misuse or intentional inhalation abuse may cause death without warning symptoms, due to cardiac effects. Other symptoms potentially related to misuse or inhalation abuse are: Anaesthetic effects, Light-headedness, dizziness, confusion, incoordination, drowsiness, or unconsciousness, irregular heartbeat with a strange sensation in the chest, heart thumping, apprehension, feeling of fainting, dizziness or weakness. Vapours are heavier than air and can cause suffocation by reducing oxygen available for breathing.
• Target Organs Isobutane (<0.1% butadiene): Central nervous system

Carcinogenicity:
None of the components present in this material at concentrations equal to or greater than 0.1% are listed by IARC, NTP, or OSHA, as a carcinogen.

Section 4. First Aid Measures:

• Skin contact: In case of contact, immediately flush skin with plenty of water for at least 15 minutes. Take off all contaminated clothing immediately. Consult a physician. Wash contaminated clothing before re-use. Treat for frostbite if necessary by gently warming affected area.
• Eye contact: In case of contact, immediately flush eyes with plenty of water for at least 15 minutes. Consult a physician if necessary.
• Inhalation: Remove from exposure, lie down. Move to fresh air. Keep patient warm and at rest. Artificial respiration and/or oxygen may be necessary. Consult a physician.
• Ingestion: Is not considered a potential route of exposure.
• General advice: Never give anything by mouth to an unconscious person. When symptoms persist or in all cases of doubt seek medical advice.
• Notes to physician: Because of possible disturbances of cardiac rhythm, catecholamine drugs, such as epinephrine, that may be used in situations of emergency life support should be used with special caution.

Section 5. Firefighting Measures:
Flammable Properties:

• Flash point: does not flash
• Lower explosion limit: Method : None per ASTM E681
• Upper explosion limit: Method : None per ASTM E681
• Fire and Explosion Hazard: Cylinders are equipped with pressure and temperature relief devices, but may still rupture under fire conditions. Decomposition may occur. Contact of welding or soldering torch flame with high concentrations of refrigerant can result in visible changes in the size and colour of the torch flame.

Product Details:

R134a was introduced as a replacement for chlorofluorocarbons (CFCs) in many applications. CFCs, which were developed over 60 years ago, have many unique properties. They are low in toxicity, nonflammable, noncorrosive and compatible with other materials. In addition, they offer the thermodynamic and physical properties that make them ideal for a variety of uses. CFCs are used as refrigerants; as blowing agents in the manufacture of insulation, packaging and cushioning foams; as cleaning agents for metal and electronic components; and in many other applications.
However, the stability of these compounds, coupled with their chlorine content, has linked them to depletion of the earth’s protective ozone layer. As a result, it has phased out production of CFCs and introduced environmentally acceptable alternatives, such as hydrofluorocarbon (HFC) 134a.

Additional Information:

• Production Capacity: AS PER REQUIREMENT
• Delivery Time: SAME DAY
• Packaging Details: 1 BOX - 20 CANES (450gm)